PR-12-2-100-1/4-12-E-RP熱電阻美國omega

簡要描述：PR-12-2-100-1/4-12-E-RP熱電阻美國omega, 一手貨源,優勢批發,精度高,是優質的熱電阻.

產品型號：
廠商性質：代理商
更新時間：2025-05-21
訪問量：3210

詳情介紹

PR-12-2-100-1/4-12-E-RP熱電阻美國omega

備用Pt100 RTD探頭，用于連接頭組件
PR-12-RP Series
備用Pt100 RTD探頭，用于連接頭組件
PR-12-RP Series:備用Pt100 RTD探頭，用于連接頭組件
PR-12-2-100-1/4-6-E-RP
Replacement Probes Used with Connection Heads or Enclosures
Pt100 Class A Wire Wound Sensing Element
Includes Two 1/2 NPT Mounting Threads
Available in Fixed Length and Spring Loaded Designs
Fixed Length Probes Available in 1/8, 3/16 and 1/4" Diameters Standard
Spring Loaded Probes Available in 1/4" Diameter Standard, 1/8" and 3/16" Also Available
-200 to 500°C (-328 to 932°F) Temperature Range
260°C (500°F) Max at Wire Connection End
Connection Heads and Thermowells Also Available.
Replacement RTD probes are available in two configurations, fixed length for direct immersion or spring loaded for use in thermowells (allows for good contact with the bottom of the thermowell). Each probe features #26 AWG stranded nickel plated copper, PFA insulated wires (2 black, 1 red) 6" long standard.
These probe assemblies can be used as replacement sensors for our PR-12, -14 and -18 RTD sensor assemblies, used as is, or combined with our optional thermowells and connection heads to design your own sensor configuration.
Fixed Length Probes:
When ordering fixed length replacement probes, the length of the probe is specified from the tip of the probe to the full engagement point of the 1/2NPT thread (which is typically 1/2" as shown). Note: If being used in a thermowell, typically spring loaded probes are recommended. Otherwise, the thread engagement must be taken into account to insure that the sensor is not damaged by contacting the bottom of the thermowell bore during installation.
Fixed Length Probes
Spring Loaded Probes:
When ordering spring loaded replacement probes, the length of the probe should be specified as the immersion length of the thermowell it will be placed into. The immersion length is the distance from the top of the thermowell to the bottom of the bore.
Spring Loaded probes are used to insure that the probe bottoms in the thermowell, and that a small amount of force is present to insure that this contact is maintained when exposed to process conditions. The actual probe length of the sensor before n is a little longer than the immersion length as shown below to allow for a 1/4" spring compression when the sensor is threaded into the thermowell.
Spring Loaded Probes

產品型號/產品描述
1/8" Dia. Probes, Fixed Length
PR-12-2-100-1/8-6-E-RP Fixed Length, 1/8" Dia. 6" Long
PR-12-2-100-1/8-9-E-RP Fixed Length, 1/8" Dia. 9" Long
PR-12-2-100-1/8-12-E-RP Fixed Length, 1/8" Dia. 12" Long
PR-12-2-100-1/8-18-E-RP Fixed Length, 1/8" Dia. 18" Long
PR-12-2-100-1/8-24-E-RP Fixed Length, 1/8" Dia. 24" Long
3/16" Dia. Probes, Fixed Length
PR-12-2-100-3/16-6-E-RP Fixed Length, 3/16" Dia. 6" long
PR-12-2-100-3/16-9-E-RP Fixed Length, 3/16" Dia. 9" Long
PR-12-2-100-3/16-12-E-RP Fixed Length, 3/16" Dia. 12" Long
PR-12-2-100-3/16-18-E-RP Fixed Length, 3/16" Dia. 18" Long
PR-12-2-100-3/16-24-E-RP Fixed Length, 3/16" Dia. 24" Long
1/4" Dia. Probes, Fixed Length
PR-12-2-100-1/4-6-E-RP Fixed Length, 1/4" Dia. 6" Long
PR-12-2-100-1/4-9-E-RP Fixed Length, 1/4" Dia. 9" Long
PR-12-2-100-1/4-12-E-RP Fixed Length, 1/4" Dia. 12" Long
PR-12-2-100-1/4-18-E-RP Fixed Length, 1/4" Dia. 18" Long
PR-12-2-100-1/4-24-E-RP Fixed Length, 1/4" Dia. 24" Long
1/4" Dia. Probes, Spring Loaded
PR-12-2-100-1/4-6-E-RP-SL Spring Loaded, 1/4" Dia. 6" Long
PR-12-2-100-1/4-9-E-RP-SL Spring Loaded, 1/4" Dia. 9" Long
PR-12-2-100-1/4-12-E-RP-SL Spring Loaded, 1/4" Dia. 12" Long
PR-12-2-100-1/4-18-E-RP-SL Spring Loaded, 1/4" Dia. 18" Long
PR-12-2-100-1/4-24-E-RP-SL Spring Loaded, 1/4" Dia. 24" Long

==============================

PR-12-2-100-1/4-12-E
PR-12-2-100-1/4-12-E-CLA
PR-12-2-100-1/4-12-E-PFA
PR-12-2-100-1/4-12-E-RP
PR-12-2-100-1/4-12-E-RP-SL
PR-12-2-100-1/4-12-E-SL
PR-12-2-100-1/4-12-E-SL-TX904
PR-12-2-100-1/4-12-E-SL-TX92
PR-12-2-100-1/4-12-E-SL-TX94
PR-12-2-100-1/4-18-E

PR-12-2-100-1/4-24-E-RP-SL
PR-12-2-100-1/4-24-E-SL
PR-12-2-100-1/4-24-E-SL-TX904
PR-12-2-100-1/4-24-E-SL-TX92
PR-12-2-100-1/4-24-E-SL-TX94
PR-12-2-100-1/4-3-E-RP
PR-12-2-100-1/4-6-E
PR-12-2-100-1/4-6-E-CLA
PR-12-2-100-1/4-6-E-PFA
PR-12-2-100-1/4-6-E-RP

PR-12-2-100-3/16-24-E
PR-12-2-100-3/16-24-E-CLA
PR-12-2-100-3/16-24-E-RP
PR-12-2-100-3/16-24-E-RP-SL
PR-12-2-100-3/16-24-E-SL
PR-12-2-100-3/16-24-E-SL-TX904
PR-12-2-100-3/16-24-E-SL-TX92
PR-12-2-100-3/16-24-E-SL-TX94
PR-12-2-100-3/16-6-E
PR-12-2-100-3/16-6-E-CLA

PR-12-2-100-1/8-9-E-SL
PR-12-2-100-1/8-9-E-SL-TX904
PR-12-2-100-1/8-9-E-SL-TX92
PR-12-2-100-1/8-9-E-SL-TX94
PR-12-2-100-3/16-12-E
PR-12-2-100-3/16-12-E-CLA
PR-12-2-100-3/16-12-E-RP
PR-12-2-100-3/16-12-E-RP-SL
PR-12-2-100-3/16-12-E-SL
PR-12-2-100-3/16-12-E-SL-TX904

PR-12-2-100-1/4-6-E-RP-SL
PR-12-2-100-1/4-6-E-SL
PR-12-2-100-1/4-6-E-SL-TX904
PR-12-2-100-1/4-6-E-SL-TX92
PR-12-2-100-1/4-6-E-SL-TX94
PR-12-2-100-1/4-9-E
PR-12-2-100-1/4-9-E-CLA
PR-12-2-100-1/4-9-E-RP
PR-12-2-100-1/4-9-E-RP-SL
PR-12-2-100-1/4-9-E-SL

PR-12-2-100-1/8-6-E-RP
PR-12-2-100-1/8-6-E-RP-SL
PR-12-2-100-1/8-6-E-SL
PR-12-2-100-1/8-6-E-SL-TX904
PR-12-2-100-1/8-6-E-SL-TX92
PR-12-2-100-1/8-6-E-SL-TX94
PR-12-2-100-1/8-9-E
PR-12-2-100-1/8-9-E-CLA
PR-12-2-100-1/8-9-E-RP
PR-12-2-100-1/8-9-E-RP-SL

PR-12-2-100-1/4-9-E-SL-TX904
PR-12-2-100-1/4-9-E-SL-TX92
PR-12-2-100-1/4-9-E-SL-TX94
PR-12-2-100-1/8-12-E
PR-12-2-100-1/8-12-E-CLA
PR-12-2-100-1/8-12-E-RP
PR-12-2-100-1/8-12-E-RP-SL
PR-12-2-100-1/8-12-E-SL
PR-12-2-100-1/8-18-E
PR-12-2-100-1/8-18-E-CLA

PR-12-2-100-3/16-12-E-SL-TX92
PR-12-2-100-3/16-12-E-SL-TX94
PR-12-2-100-3/16-18-E
PR-12-2-100-3/16-18-E-CLA
PR-12-2-100-3/16-18-E-RP
PR-12-2-100-3/16-18-E-RP-SL
PR-12-2-100-3/16-18-E-SL
PR-12-2-100-3/16-18-E-SL-TX904
PR-12-2-100-3/16-18-E-SL-TX92
PR-12-2-100-3/16-18-E-SL-TX94

PR-12-2-100-1/4-18-E-CLA
PR-12-2-100-1/4-18-E-RP
PR-12-2-100-1/4-18-E-RP-SL
PR-12-2-100-1/4-18-E-SL
PR-12-2-100-1/4-18-E-SL-TX904
PR-12-2-100-1/4-18-E-SL-TX92
PR-12-2-100-1/4-18-E-SL-TX94
PR-12-2-100-1/4-24-E
PR-12-2-100-1/4-24-E-CLA
PR-12-2-100-1/4-24-E-RP

PR-12-2-100-1/8-18-E-RP
PR-12-2-100-1/8-18-E-RP-SL
PR-12-2-100-1/8-18-E-SL
PR-12-2-100-1/8-24-E
PR-12-2-100-1/8-24-E-CLA
PR-12-2-100-1/8-24-E-RP
PR-12-2-100-1/8-24-E-RP-SL
PR-12-2-100-1/8-24-E-SL
PR-12-2-100-1/8-6-E
PR-12-2-100-1/8-6-E-CLA

==============================

產品型號生成器
(1) (2) (3)
PR-12-2-100 -
-
-E-RP
選項描述
(1) Probe Diameter
選擇
1/8 代表 1/8 in
3/16 代表 3/16 in
1/4 代表 1/4 in
(2) Sheath Length
選擇
6 代表 6 in
9 代表 9 in
12 代表 12 in
18 代表 18 in
24 代表 24 in
(3) Spring Loaded
選擇
Nothing(leave field blank) 代表 None
-SL 代表 Spring Loaded

PR12-RP工業鎧裝熱電阻探頭-熱電阻更換探頭特點

1/2NPT安裝螺紋,用于更換的探頭
金屬護套材質：304不銹鋼
彈簧加載(SL代碼-選項)：改善響應時間和耐振動時使用
熱電阻傳感器為100 ?繞線式"A"級 DIN鉑電阻,3線配置（提供2線和4線配置）
標準為3線制配置，IEC60751/ASTM-E-1137顏色代碼，（2線和4線制訂貨時說明）
測溫范圍：-50 to 500oC

PR12-RP工業鎧裝熱電阻探頭-熱電阻更換探頭常用型號

1/8" (3.0mm)直徑型號
PR-12-2-100-1/8-6-E-RP	固定長度, 1/8" 直徑， 6" 長度
PR-12-2-100-1/8-9-E-RP	固定長度, 1/8" 直徑， 9" 長度
PR-12-2-100-1/8-12-E-RP	固定長度, 1/8" 直徑， 12" 長度
PR-12-2-100-1/8-18-E-RP	固定長度, 1/8" 直徑， 18" 長度
PR-12-2-100-1/8-24-E-RP	固定長度, 1/8" 直徑， 24" 長度
3/16" （4.5mm）直徑型號
PR-12-2-100-3/16-6-E-RP	固定長度, 3/16" 直徑， 6" 長度
PR-12-2-100-3/16-9-E-RP	固定長度, 3/16" 直徑， 9" 長度
PR-12-2-100-3/16-12-E-RP	固定長度, 3/16" 直徑， 12" 長度
PR-12-2-100-3/16-18-E-RP	固定長度, 3/16" 直徑， 18" 長度
PR-12-2-100-3/16-24-E-RP	固定長度, 3/16" 直徑， 24" 長度
1/4" (6.0mm)直徑型號
PR-12-2-100-1/4-6-E-RP	固定長度, 1/4" 直徑， 6" 長度
PR-12-2-100-1/4-9-E-RP	固定長度, 1/4" 直徑， 9" 長度
PR-12-2-100-1/4-12-E-RP	固定長度, 1/4" 直徑， 12" 長度
PR-12-2-100-1/4-18-E-RP	固定長度, 1/4" 直徑， 18" 長度
PR-12-2-100-1/4-24-E-RP	固定長度, 1/4" 直徑， 24" 長度
1/4" (6.0mm)直徑帶彈簧加載型號
PR-12-2-100-1/4-6-E-RP-SL	帶彈簧加載, 1/4" 直徑， 6" 長度
PR-12-2-100-1/4-9-E-RP-SL	帶彈簧加載, 1/4" 直徑， 9" 長度
PR-12-2-100-1/4-12-E-RP-SL	帶彈簧加載, 1/4" 直徑， 12" 長度
PR-12-2-100-1/4-18-E-RP-SL	帶彈簧加載, 1/4" 直徑， 18" 長度
PR-12-2-100-1/4-24-E-RP-SL	帶彈簧加載, 1/4" 直徑， 24" 長度