您的位置：
FLMG-14022BR流量計 美國omega
簡要描述：FLMG-14022BR流量計 美國omega，美國omega流量儀表 一手貨源,優勢批發
產品型號：- 廠商性質：代理商
- 更新時間：2025-05-23
- 訪 問 量：1458
FLMG-14022BR流量計 美國omega
Variable Area In-line Pneumatic Flowmeters
FLMG Series
1年保修 CE
Variable Area Flow Meters for Gas
FLMG Series:Variable Area In-line Pneumatic Flowmeters
Monitoring Most Pneumatic or Compressed Gas Systems
Flow Rates From 1 to 900 SCFM @ 100 psi
High Pressure: to 600 psi for Brass or Aluminum, 1000 psi for Stainless Steel
High Temperature—to 116°C (240°F) Standard, 204 or 316°C (400 or 600°F) Optional
Mounts in Any Position
Relay Alarms and Analog Outputs Optional
Dual SCFM and SLPS Scales
The FLMG flowmeters feature rugged construction, easy installation, and direct-reading flow rates of air. The units are calibrated at 100 psi pressure, suitable for most compressed pneumatic applications.
The spring-and-piston type assembly enables these flowmeters to be mounted in any position. The FLMG models with optional analog output (-MA) are typically used to transmit a signal proportional to the flow rate to a process controller, a PLC, a recorder, or a panel-mount display. With the -MA option, the user can choose between reading a 0 to 2000 Hz square-wave pulse, a 0 to 5 Vdc analog signal, or a 2-wire 4 to 20 mA analog signal by connecting the appropriate pins.
規格：
Measuring Accuracy: ±2.5% FS in the center third of the measuring range; ±4% FS over the entire scale range
Repeatability: ±1% FS
Flow Measuring Range: 1.2 to 900 SCFM
Maximum Operating Pressure:
Aluminum and Brass Monitors: 40 bar (600 psig)
Stainless Steel Monitors: 70 bar (1000 psig) up to 116°C (240°F)
Maximum Operating Temperature: 116°C (240°F)
Note: For options “-HT" and “-UHT", see high-temperature graph on spec sheet
Pressure Differential: See the pressure graphs on spec sheet.
Standard Calibration Fluids: Air @ 21°C (70°F), 1.0 sg and 6.8 bar (100 psig)
Relay (Optional): 1 or 2 form “C" relays, rated 10 A, 125 or 250 Vac or ? A, 250 Vdc
Mechanical Life: >106 cycles
Analog Output (Optional): Supply voltage 12 to 35 Vdc, field selectable for 0 to 5 Vdc (100 W minimum load), 0 to 2000 Hz square-wave pulse or 4 to 20 mA
Rmax = 50 (Vs - 12)
(Vs = supply voltage DC)
Installation Dimensions:
1/4 and 1/2 NPT Sizes: 1-7/8 OD x 6-9/16" length
3/4 and 1 NPT Sizes: 2-3/8 OD x 7-5/32" length
1-1/4 and 1-1/2 NPT Sizes: 3-1/2 OD x 10-1/8" length
| Description | Aluminum | Brass | Stainless Steel |
| High pressure casing, end ports and tapered shaft | Aluminum | Brass | 304 SS |
| Seals | Buna (std), EPR, FKM or perfluoroelastomer | Buna (std), EPR, FKM or perfluoroelastomer | FKM with PTFE backup (std) Buna, EPR or perfluoroelastomer |
| Transfer Magnet | PTFE-coated Alnico | PTFE-coated Alnico | PTFE-coated Alnico |
| Floating Orifice Disk | Stainless Steel | Stainless Steel | Stainless Steel |
| All Other Internal Parts | Stainless Steel | Stainless Steel | Stainless Steel |
產品型號 產品描述
Air Flowmeters, 1/4 NPT
FLMG-14012AL 1/4 NPT Aluminum 12 SCFM
FLMG-14012BR 1/4 NPT Brass 12 SCFM
FLMG-14012SS 1/4 NPT 304 SS 12 SCFM
FLMG-14022AL 1/4 NPT Aluminum 23 SCFM
FLMG-14022BR 1/4 NPT Brass 23 SCFM
FLMG-14022SS 1/4 NPT 304SS 23 SCFM
FLMG-14050AL 1/4 NPT Aluminum 50 SCFM
FLMG-14050BR 1/4 NPT Brass 50 SCFM
FLMG-14050SS 1/4 NPT 304SS 50 SCFM
FLMG-14100AL 1/4 NPT Aluminum 100 SCFM
FLMG-14100BR 1/4 NPT Brass 100 SCFM
FLMG-14100SS 1/4 NPT 304SS 100 SCFM
Air Flowmeters, 3/8 NPT
FLMG-38012AL 3/8 NPT Aluminum 12 SCFM
FLMG-38012BR 3/8 NPT Brass 12 SCFM
FLMG-38012SS 3/8 NPT 304 SS 12 SCFM
FLMG-38022AL 3/8 NPT Aluminum 23 SCFM
FLMG-38022BR 3/8 NPT Brass 23 SCFM
FLMG-38022SS 3/8 NPT 304SS 23 SCFM
FLMG-38050AL 3/8 NPT Aluminum 50 SCFM
FLMG-38050BR 3/8 NPT Brass 50 SCFM
FLMG-38050SS 3/8 NPT 304SS 50 SCFM
FLMG-38100AL 3/8 NPT Aluminum 100 SCFM
FLMG-38100BR 3/8 NPT Brass 100 SCFM
FLMG-38100SS 3/8 NPT 304SS 100 SCFM
Air Flowmeters, 1/2 NPT
FLMG-12012AL 1/2 NPT Aluminum 12 SCFM
FLMG-12012BR 1/2 NPT Brass 12 SCFM
FLMG-12012SS 1/2 NPT 304 SS 12 SCFM
FLMG-12022AL 1/2 NPT Aluminum 23 SCFM
FLMG-12022BR 1/2 NPT Brass 23 SCFM
FLMG-12022SS 1/2 NPT 304SS 23 SCFM
FLMG-12050AL 1/2 NPT Aluminum 50 SCFM
FLMG-12050BR 1/2 NPT Brass 50 SCFM
FLMG-12050SS 1/2 NPT 304SS 50 SCFM
FLMG-12100AL 1/2 NPT Aluminum 100 SCFM
FLMG-12100BR 1/2 NPT Brass 100 SCFM
FLMG-12100SS 1/2 NPT 304SS 100 SCFM
Air Flowmeters, 3/4 NPT
FLMG-34050AL 3/4 NPT Aluminum 60 SCFM
FLMG-34050BR 3/4 NPT Brass 60 SCFM
FLMG-34050SS 3/4 NPT 304SS 60 SCFM
FLMG-34100AL 3/4 NPT Aluminum 100 SCFM
FLMG-34100BR 3/4 NPT Brass 100 SCFM
FLMG-34100SS 3/4 NPT 304SS 100 SCFM
FLMG-34150AL 3/4 NPT Aluminum 150 SCFM
FLMG-34150BR 3/4 NPT Brass 150 SCFM
FLMG-34150SS 3/4 NPT 304SS 150 SCFM
FLMG-34260AL 3/4 NPT Aluminum 330 SCFM
FLMG-34260BR 3/4 NPT Brass 330 SCFM
FLMG-34260SS 3/4 NPT 304SS 330 SCFM
Air Flowmeters, 1 NPT
FLMG-10050AL 1 NPT Aluminum 60 SCFM
FLMG-10050BR 1 NPT Brass 60 SCFM
FLMG-10050SS 1 NPT 304SS 60 SCFM
FLMG-10100AL 1 NPT Aluminum 100 SCFM
FLMG-10100BR 1 NPT Brass 100 SCFM
FLMG-10100SS 1 NPT 304SS 100 SCFM
FLMG-10150AL 1 NPT Aluminum 150 SCFM
FLMG-10150BR 1 NPT Brass 150 SCFM
FLMG-10150SS 1 NPT 304SS 150 SCFM
FLMG-10260AL 1 NPT Aluminum 330 SCFM
FLMG-10260BR 1 NPT Brass 330 SCFM
FLMG-10260SS 1 NPT 304SS 330 SCFM
Air Flowmeters, 1-1/4 NPT
FLMG-1140450AL 1-1/4 NPT Aluminum 470 SCFM
FLMG-1140450BR 1-1/4 NPT Brass 470 SCFM
FLMG-1140450SS 1-1/4 NPT 304SS 470 SCFM
FLMG-1141000AL 1-1/4 NPT Aluminum 900 SCFM
FLMG-1141000BR 1-1/4 NPT Brass 900 SCFM
FLMG-1141000SS 1-1/4 NPT 304 SS 900 SCFM
Air Flowmeters, 1-1/2 NPT
FLMG-1120450AL 1-1/2 NPT Aluminum 470 SCFM
FLMG-1120450BR 1-1/2 NPT Brass 470 SCFM
FLMG-1120450SS 1-1/2 NPT 304SS 470 SCFM
FLMG-1121000AL 1-1/2 NPT Aluminum 900 SCFM
FLMG-1121000BR 1-1/2 NPT Brass 900 SCFM
FLMG-1121000SS 1-1/2 NPT 304 SS 900 SCFM
注釋: Comes complete with operator's manual.
For units with BSPP threads add -BSPP to the model number. (Not available on 1/4" size).<
NIST traceable calibration is not available on FLMG models!
Minimum Flowrate = 10% of maximum
For operation up to 400°F, add suffix "-HT" to model number.
For operation up to 600°F, add suffix "-UHT" to model number.
For units with one 10A @220 Vac Form C relay, add suffix "-R1" to model number.
For two such relays, add suffix "-R2" to model number.
For units with 4-20 mA output powered by 12-35 Vdc, add suffix "-MA" to model number.
Consult Sales for additional costs.
Bi-Directional Flow is not available on FLMG models.
Only one option may be ordered with each unit.
(OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$)
FLMG-14022BR流量計 美國omega
相關產品：FL-6412A-316流量計 美國omega
